Alien Pod DSD106 Guia de preparacion descargar pdf (Pagina 67)

Tasks :

· Find out what the external IP address is, this is assigned by the customer’s

Internet Service Provider

· Find out : is this a fixed IP address, ie: “Static, or does it change, ie:

“Dynamic” ?

· Configure network settings in the DVR manually

· Configure network settings in the PC to “Obtain IP Address Automatically” if

possible, if not, then configure manually

· Connect DVR & PC to the modem/router using patch cables

· Install and configure the DVR client software

· Reboot both DVR & PC

· Test the PCs connection to the DVR using ‘Ping’

· Use the client software to connect to the DVR from the local PC

· Ensure the PC has outbound Internet access

· Configure the modem router for inbound access using either “Port

Forwarding”, or “DMZ”

· Ask a colleague offsite to test Internet access by connecting to the router’s

external IP address

9.6 Network Cable Connections

If you are connecting the Alien to a modem/router, network hub or switch then

you must use a patch or LAN cable. If you are connecting direct between the DVR

and a PC then you must use a crossover cable. The patch cable connections are the

same at both ends but a crossover cable is wired so that there are no Ethernet

connections.

Patch/LAN Cable Connections

1. White/Orange 1. White/Orange

2. Orange 2. Orange

3. White/Green 3. White/Green

4. Blue 4. Blue

5. White/Blue 5. White/Blue

6. Green 6. Green

7. White/Brown 7. White/Brown

8. Brown 8. Brown

Crossover Cable Connections